Techstar Bumperfloats are a unique combination of dock bumper and flotation. Designed to run the length of your dock on both sides, these floats will comfortably float a dock 8 feet wide. For docks 10 to 12 feet wide we recommend a row of AP-8 All Purpose Floats up the middle and for docks 14 to 16 feet wide we recommend 2 rows of AP-8's.

Bumper Float Features and Benefits:

Dock Bumpers are built as part of the float
Foam filled with closed cell EPS (expanded polystyrene) for added security
Your wood frame, hardware and decking stay out of water.
Polyethylene is environmentally friendly, as well as gasoline and wildlife resistant.
Construction is simple. Build a frame with corner brackets and attach floats through molded bolt holes (there are 5 holes per float).
Your new dock will sit low to the water for maximum stability.
Deck boards sit flush with top of the float for a clean finish.

Requirements:

2 Floats are required for every 4 feet in dock length therefore a 16' x 8' dock similar to the one below would require 8 floats.

Model #	Outside Dimensions	Flotation (pounds)	Average Wall Thickness	Sq. Foot Deck Coverage	Shipping Weight (pounds)	Pack
BF-1	24"x48"x16"	415	.187	n/a	43	12