Heavy Duty Shoulder Floats

The top of the line at Techstar. Our Heavy Duty Shoulder Floats are commonly used in large commercial docks. Two size floats accommodate finger docks 24”, 30” and 48” wide.

Heavy Duty Shoulder Float Features and Benefits: You can comfortably use large framing such as 2 x 12 or 3 x 10 12 Molded holes in each float for ease of attachment Adjustable dock height with different frame heights Our toughest floats - 3/8” thick Molded cable trough

Requirements:

A minimum of one HD Shoulder Float is required for every 25 square feet of deck surface you are building. If you are building a dock 60'x10” or 600 square feet, you would need 24 floats minimum (600 divided by 25=24) to float your dock properly. If you are hinging 30” x 20' finger docks to this main dock, each finger would be 2.5 x 20=50 square feet. You would need a minimum of 2 Mode MF-30306 floats for each finger, one mounted about a foot from the deep end and one in the middle. The main dock should float the hinged end well enough.